Products

Location：Home > Products > Hardfacing flux-cored wires
Product Classification
Welding electrode
Non-alloy steel and fine-grain steel
High-strength steel electrodes
Heat-resistant steel electrodes
Stainless steel electrodes
Surfacing electrodes
Cast iron electrodes
Nickel and nickel alloy electrodes
Cobalt-based electrodes
Flux cored wire
Stainless steel flux-cored wires
Hardfacing flux-cored wires
Heat-resistant steel flux-cored wires
solid wire
Stainless steel TIG welding wires
Stainless steel TGF (Backing Self-Shielded) welding wire
Stainless steel MIG welding wires
Stainless steel submerged arc welding wires
Nickel-based TIG welding wires
Nickel-based MIG welding wires
Hardfacing flux-cored wires
Name
Spec
Std
Purpose
WS.MF581
1.2/1.6
   
   
It has good performance in terms of wear resistance under low impact conditions and is suitable for surface welding of components that withstand strong abrasive wear, such as coal grinding rings, coal grinding rollers, mining cutters, etc.
WFD-256C
1.2/1.6
 
 
Suitable for welding various crushers, high manganese steel rails, bulldozers, and other parts that are prone to wear due to impact.
WFD-397
1.2/1.6
 
 
Suitable for hot forging dies on cast or forged steel for welding, high-strength wear-resistant parts, and can also be used to repair old forging dies made of 5CrMnMo, 5CrNiMo, and 5CrNiSiW steel.
WFD-507
1.2/1.6
 
 
Suitable for shafts and valves made of carbon steel or alloy steel with a welding working temperature below 450 ° C.
WFD-507MO
1.2/1.6
 
 
Suitable for sealing surfaces of medium temperature and high-pressure globe valves with welding working temperatures below 510 ° C.
WFD-517
1.2/1.6
 
 
Suitable for welding carbon steel or alloy steel shafts, valves for superheated steam, agitator slurry, spiral conveying blades, etc., the welding layer is harder than D507.
WFD-547MO
1.2/1.6
 
 
Suitable for high-pressure valve sealing surfaces with welding working temperatures below 600 ° C.
WFD-212
1.2/1.6
 
 
Suitable for single-layer or multi-layer welding of various damaged surfaces, such as gears, excavators, mining machinery, etc.
WFD-855
1.2/1.6
 
 
Used for surface welding of abrasive wear parts that withstand strong impacts, such as shield tunneling tools, petroleum drill rods, mining cutters, etc.
WS.MD61
1.2/1.6
 
 
Used for surface welding of components subjected to strong impact and abrasive wear, such as shield tunneling tools, petroleum drill rods, mining cutters, etc.
WS.MF582
1.2/1.6
 
 
It has good performance in terms of wear resistance under low impact conditions and is suitable for surface welding of components that withstand strong abrasive wear, such as coal grinding rings, coal grinding rollers, mining cutters, etc.
WS.MF582
1.2/1.6
 
 
It has good performance in terms of wear resistance under low impact conditions and is suitable for surface welding of components that withstand strong abrasive wear, such as coal grinding rings, coal grinding rollers, mining cutters, etc.
WS.MF586
1.2/1.6
 
 
It has good performance in terms of wear resistance under low impact conditions and is suitable for surface welding of components that withstand strong abrasive wear, such as coal grinding rings, coal grinding rollers, mining cutters, etc.
WS.MF587
1.2/1.6
 
 
It has good performance in terms of wear resistance under low impact conditions and is suitable for surface welding of components that withstand strong abrasive wear, such as coal grinding rings, coal grinding rollers, mining cutters, shield tunneling cutters, etc.
WS.MF588
1.2/1.6
 
 
It has good performance in terms of wear resistance under low impact conditions and is suitable for surface welding of components that withstand strong abrasive wear, such as coal grinding rings, coal grinding rollers, mining cutters, shield tunneling cutters, etc.
WS.MF589
1.2/1.6
 
 
It has good performance in terms of wear resistance under low impact conditions and is suitable for surface welding of components that withstand strong abrasive wear, such as coal grinding rings, coal grinding rollers, mining cutters, shield tunneling cutters, etc.
WS.MF968
1.2/1.6
   
   
Hammer type coal mill hammer heads, fan type coal mill impact plates, etc. that are used for welding to withstand slight impact loads and have good wear resistance.
WFD-577
1.2/1.6
 
 
Suitable for sealing surfaces of medium temperature and high-pressure valves with welding working temperatures below 510 ° C.
< 1 >

Contact Us

ADD：No. 16 Qinhuang Road, Machinery Manufacturing Industrial Park, Sihong County, Suqian City, Jiangsu Province

TEL：400-8987-758      0527-86660999

FAX：0527-86660989

Web：www.wansenweld.com

Products

NAVIGATION

Follow us

CopyRight @ 2025 Wansen Welding Materials (Jiangsu) Co., Ltd. All right reserved   苏ICP备2025179360号

TEL

400-8987-758

TOP